Current sensor-Anhui Sinomags Technologies Co.,Ltd.

Application

Sample request

STK-616AM5

The STK-616AM5 series current sensors are based on TMR (Tunnel Reluctance) technology and open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. The STK-616AM5 series current sensor has an built-in OCD (overcurrent detection) function. The resistance of the main wire is very low, at 0.27mΩ. Product performance:

-Bandwidth: 600 kHz -Response time: 0.9 μs -Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable frequency drive -Photovoltaic inverter -AC/DC, DC/DC power supply -Servo motor driver

Application

Sample request

STK-616AM8

The STK-616AM8 series current sensor is based on TMR (tunnel magnetoresistance) technology and open-loop design. It is suitable for DC, AC pulsed and any kind of irregular current measurement under the isolated conditions. The STK-616AM8 series current sensor has built in OCD (Over Current Detection) function. The primary conductor has very low resistance of 0.27mΩ.  The product is packaged in standard SOIC10 form.  AEC-Q100,automotive qualified. Product performance:

-Bandwidth: 600 kHz -Response time: 0.9 μs -Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable frequency drive -Photovoltaic inverter -AC/DC, DC/DC power supply -Servo motor driver

Application

Sample request

STK-616AM3

The STK-616AM3 series current sensor is based on TMR (tunnel magnetoresistance) technology and open-loop design. It is suitable for DC, AC pulsed and any kind of irregular current measurement under the isolated conditions. The STK-616AM3 series current sensor has built in OCD (Over Current Detection) function. The primary conductor has very low resistance of 0.27mΩ. Product performance:

-OCD function -Bandwidth: 600 kHz -Response time: 0.9 μs -Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable frequency drive -Photovoltaic inverter -AC/DC, DC/DC power supply -Servo motor driver

Application

Sample request

STK-616TMW

The STK-616TMW series current sensor is based on TMR (tunnel magnetoresistance) technology and open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. Product performance:

-Bandwidth: 1000 kHz -Response time: 0.2 μs -Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable frequency drive -Welding machine power supply -Inverter -Switching power supply -Medium and low power frequency converters -Current detection motor -Phase and rail current detection -Series photovoltaic inverter current detection, Maximum power point tracker(MPPT) -Current detection vehicle charger -DC-DC converter -DC power overcurrent protection -Uninterruptible Power Supply (UPS)

Application

Sample request

STK-616TMF5

The STK-616TMF5 series current sensor is based on TMR (tunnel magnetoresistance) technology and open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. Product performance:

-Bandwidth: 1500 kHz -Response time: 0.2 μs -Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable frequency drive -Welding machine power supply -Inverter -Switching power supply -Medium and low power frequency converters -Current detection motor -Phase and rail current detection -Series photovoltaic inverter current detection, Maximum power point tracker(MPPT) -Current detection vehicle charger -DC-DC converter -DC power overcurrent protection -Uninterruptible Power Supply (UPS)

Application

Sample request

STK-616TMF

The STK-616TM series current sensor is based on TMR (tunnel magneto resistance) technology and open-loop design. It is suitable for DC, AC pulsed and any kind of irregular current measurement under the isolated conditions. Product performance:

-Bandwidth: 1500 kHz -Response time: 0.2 μs -Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC Variable speed drives -AC/DC, DC/DC power supplies -Inverter -Switched model power supplies (SMPS)

Application

Sample request

STK-616BML

The STK-616BM series current sensor is based on TMR (magnetoresistance) technology and open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. Product performance:

-Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable frequency drive -AC/DC, DC/DC power supply -Inverter -Switching mode power supply (SMPS)

Application

Sample request

STK-616KMF

The STK-616KM series current sensor is based on TMR (tunnel magnetoresistance) technology and open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. Product performance:

-Bandwidth: 1500 kHz -Response time: 0.2 μs -Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable frequency drive -Welding machine power supply -Inverter -Switching power supply -Medium and low power frequency converters -Current detection motor -Phase and rail current detection -Series photovoltaic inverter current detection, Maximum power point tracker(MPPT) -Current detection vehicle charger -DC-DC converter -DC power overcurrent protection -Uninterruptible Power Supply (UPS)

Application

Sample request

STK-616DML

The STK-616DM series current sensor is based on TMR (magnetoresistance) technology and open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. Product performance:

-Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable frequency drive -AC/DC, DC/DC power supply -Inverter -Switching mode power supply (SMPS)

Application

Sample request

STK-616ZMF

The STK-616ZMF series current sensor is based on TMR (magnetoresistance) technology and open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. Product performance:

-Bandwidth: 2000 kHz -Response time: 0.3 μs -Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable speed drive -AC/DC, DC/DC power supply -Inverter -Switching mode power supply (SMPS) -Medium and low power frequency converters -Current detection motor -Phase and rail current detection -Series photovoltaic inverter current detection, Maximum power point tracker(MPPT) -Current detection vehicle charger -DC-DC converter -DC power overcurrent protection -Uninterruptible Power Supply (UPS)

Application

Sample request

STK-600/M-MPFF&MPSF

The STK-600/M series current sensor is based on TMR (tunnel magnetoresistance) technology, and it has an open-loop design. It is suitable for DC, AC pulsed and any kind of irregular current measurement under the isolated conditions. Product performance:

-Current detection range: ±50,±100,±150,±166,±120,±200,±250A -Single channel or multi-channel current detection -Response time is 4.6 μs -Bandwidth of 120 kHz -High EMC performance

Typical applications:

-AC variable speed drive -Electric welder power supply -Motor driver -Battery Monitoring and Management System(BMS)

Application

Sample request

STK-616ZMT

The STK-616ZMT series current sensor adopts TMR (Tunnel Reluctance) technology and adopts an open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. Product performance:

-Bandwidth: 2000 kHz -Response time: 0.05 μs -Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable speed drive -Switching mode power supply (SMPS) -Motor control -Medium and low power frequency converters -Current detection motor -Phase and rail current detection -Series photovoltaic inverter current detection, Maximum power point tracker(MPPT) -Current detection vehicle charger -DC-DC converter -DC power overcurrent protection -Uninterruptible Power Supply (UPS)

Application

Sample request

STK-600-M-PFF&PSF&PSS

The STK-600/M series current sensor is based on TMR (Tunnel Reluctance) technology and adopts an open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. Product performance:

-Current detection range: ±50,±100,±150,±166,±200,±250,±300,±400A -Single channel or multi-channel current detection -Response time is 2-4 μs -Bandwidth of 100 kHz -High EMC performance

Typical applications:

-AC Variable speed drives -Electric welder power supply -Motor driver -Battery Monitoring and Management System(BMS)

Application

Sample request

STK-616HML

The STK-616HM series current sensor is based on TMR (Tunnel Reluctance) technology and open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. Product performance:

-Bandwidth: 600 kHz -Response time: 0.9 μs -Open loop design -Small size non magnetic core design -Gradient field design to suppress external common mode magnetic field interference -Supports power supply voltage of 3.3 V or 5.0 V

Typical applications:

-AC variable frequency drive -Photovoltaic inverter -AC/DC, DC/DC power supply -Servo motor driver

Application

Sample request

STK-600/F

The STK-600/F series current sensor is based on TMR (Tunnel Reluctance) technology and adopts an open-loop design. Suitable for measuring DC, AC pulses, and any irregular currents under isolated conditions. Product performance:

-Extremely high bandwidth up to 800 kHz -Very fast response time reduced to 0.5μS -Open loop design -Gradient field design to suppress external common mode magnetic field interference -Support power supply voltage of 5.0 V

Typical applications:

-AC variable frequency drive -Welding machine power supply -Motor driver -BMS

Application

Sample request

STB-CAB1000

CAB1000 Series current sensor is based on Sinomags Active Close Loop technology, with CANBUS digital output. It can be used to measure 1000A rated current. Using a proprietary Digital Compensation technology. This product brings the best combination of performance and reliability. Product performance:

-Current detection range: ±1000 - High precision across all temperature ranges - Low temperature float - Wide operating voltage range - Small size, easy to install - High compatibility, easy to replace

典型应用：

- Current measurement in BMS - New energy vehicles and energy storage equipment

Application

Sample request

STB-CAB500X-XXX

The CAB500 series current sensor is based on China's active closed-loop technology and CANBUS digital output. It can be used to measure the rated current of 500A. Using a proprietary digital compensation technology. This product has the best combination of performance and reliability. Product performance:

-Current detection range: 500A - High precision across all temperature ranges - Low temperature float - Wide operating voltage range - Small size, easy to install - High compatibility, easy to replace

典型应用：

- Current measurement in BMS - New energy vehicles and energy storage equipment

Application

Sample request

STB-CAB500N-xxF

CAB500 Series current sensor is based on Sinomags Open loop fluxgate technology, with CANBUS digital output. It can be used to measure 500A rated current. Using a proprietary Digital Compensation technology. This product brings the best combination of performance and reliability. Product performance:

-Current detection range: 500A - High precision across all temperature ranges - Low temperature float - Wide operating voltage range - Small size, easy to install - High compatibility, easy to replace

典型应用：

- Hybrid and electric vehicle battery pack - Accurate current measurement for battery management applications

Application

Sample request

STB-CAB1500N-xxxx

CAB1500 Series current sensor is based on Sinomags Close Loop TMR and Open Loop TMR technology, with CANBUS digital output. It can be used to measure 1500A rated current. Using a proprietary Digital Compensation technology. This product brings the best combination of performance and reliability. Product performance:

-Current detection range: ±1500 - High precision across all temperature ranges - Low temperature float - Wide operating voltage range - Small size, easy to install - High compatibility, easy to replace

典型应用：

- Hybrid and electric vehicle battery pack - Accurate current measurement for battery management applications

Application

Sample request

STB-CAB700N-xxF

CAB700 Series current sensor is based on Sinomags Open loop fluxgate technology, with CANBUS digital output. It can be used to measure 700A rated current. Using a proprietary Digital Compensation technology. This product brings the best combination of performance and reliability. Product performance:

-Current detection range: 700A - High precision across all temperature ranges - Low temperature float - Wide operating voltage range - Small size, easy to install - High compatibility, easy to replace

典型应用：

- Hybrid and electric vehicle battery pack - Accurate current measurement for battery management applications